Allstar Performance 50125 ADAPTER FITTINGS 1/8 NPT.
Allstar Performance 50120 ADAPTER FITTINGS. ALSO AVAILABLE IN BULK, BOX OF 50 USE: ALL50120-50.
Allstar Performance 50036 ADAPTER FITTINGS.
Allstar Performance 50082 CRUSH WASHERS.
Allstar Performance 50110 INVERTED FLARE NUTS.
Fitting: Y-Block; One -10AN to Two -8AN
Wilwood 220-9886 FLEX BRAKE LINE KIT.
Aeroquip adapters are an excellent choice for high quality performance plumbing projects. You can use this S.A.E. 37 degrees flare to banjo adapter with a banjo bolt (available separately) to attach a brake line at a right angle to another brake component. It is made from high-quality steel to provide the needed confidence for use in extreme applications. This banjo bolt has a -04 hose fitting size on one end, and 7/16 brake thread size on the other. Please note: Eaton Aeroquip fitting tolerances are engineered to match Eaton Aeroquip hose tolerances. The use of Aeroquip fittings on hose supplied by other manufacturers and/or the use of Eaton Aeroquip hose with fittings supplied by other manufacturers may result in the production of unreliable and unsafe hose assemblies and is neither recommended or authorized by Eaton.
The Edelbrock/Russell Brake Adapter Fitting is made of Endura plated steel and is best suited for operating conditions where additional corrosion protection is needed. The ultra-bright finish is very durable and looks great.
Russell Female Metric Brake Adapter Fittings are designed for excellent brake system fittings. These fittings feature an endura finish which provides long lasting durability. They are corrosion resistant and ensure easy installation.
Russell Male Metric Brake Adapter Fittings are designed for excellent brake system fittings. These fittings feature an endura finish which provides long lasting durability. They are corrosion resistant and ensure easy installation.
Allstar 1/8 NPT Male Union Brake Line Adapter Fitting (Pack of 4) features a brake line adapter fitting. It is a 1/8 npt male union and sold as one set of 4 pieces. Allstar also carries a large and wide selection of quality fittings for most automotive plumbing needs. It is backed by a 90-day limited factory warranty.
(2)Delivering powerful lighting without increasing glare to on-coming traffic, an advanced H4 halogen bulb and high-sheen metal reflector are combined with advanced optics to provide a more uniform, controlled, and even illumination on the road. These lamps produce a 50 percent more powerful low beam and a 25 percent more powerful high beam than standard halogen sealed beam headlamps. This produces a greater range of vision for the driver, improves driver safety and reduces driver strain and fatigue. And the replaceable-bulb design saves money - no need to replace the entire unit if a bulb goes.
NICKEL FITTING
(1)
Russell Thru the Frame Fittings are designed for excellent brake line fittings. They feature proportioning valves which ensure easy installation. They measure 2’’ in length and are corrosion resistant.
Russell Female Metric Brake Adapter Fittings are designed for excellent brake system fittings. These fittings feature an endura finish which provides long lasting durability. They are corrosion resistant and ensure easy installation.
Aeroquip adapters are an excellent choice for high quality performance plumbing projects. You can use this S.A.E. 37 degrees flare to metric banjo adapter with a banjo bolt (available separately) to attach a brake line at a right angle to another brake component. It is made from high-quality steel to provide the needed confidence for use in extreme applications. This banjo bolt has a -04 hose fitting size on one end, and 10mm brake thread size on the other. Please note: Eaton Aeroquip fitting tolerances are engineered to match Eaton Aeroquip hose tolerances. The use of Aeroquip fittings on hose supplied by other manufacturers and/or the use of Eaton Aeroquip hose with fittings supplied by other manufacturers may result in the production of unreliable and unsafe hose assemblies and is neither recommended or authorized by Eaton.
Aeroquip adapters are an excellent choice for high quality performance plumbing projects. You can use this S.A.E. 37 degrees flare to banjo adapter with a banjo bolt (available separately) to attach a brake line at a right angle to another brake component. It is made from high-quality steel to provide the needed confidence for use in extreme applications. This banjo bolt has a -03 hose fitting size on one end, and 7/16 brake thread size on the other. Please note: Eaton Aeroquip fitting tolerances are engineered to match Eaton Aeroquip hose tolerances. The use of Aeroquip fittings on hose supplied by other manufacturers and/or the use of Eaton Aeroquip hose with fittings supplied by other manufacturers may result in the production of unreliable and unsafe hose assemblies and is neither recommended or authorized by Eaton.
3/16 inch and 1/4 inch flare nuts are used for building custom brake lines. Nuts are available to fit most master cylinders and metering/proportioning valves. Select proper thread size for line used.
Allstar Performance 50137 INVERTED FLARE TEE.
Aeroquip SAE 37 degree Male Flare to Female Inverted Flare Steel, 2 per package
